Saturday, November 27, 2004
Removal of swingarm bushes
I'm assuming that the suspension bushes were damaged when I pulled the rusty pin out so will be replacing them.
They also needed to be removed before powder coating as I'm sure the baking wouldn't improve them. With the swingarm mounted in a vice they were easily removed with a long drift.
My intention is for NP to make new bushes from plastic to fit a freshly turned pin.
I'm assuming that the suspension bushes were damaged when I pulled the rusty pin out so will be replacing them.
They also needed to be removed before powder coating as I'm sure the baking wouldn't improve them. With the swingarm mounted in a vice they were easily removed with a long drift.
My intention is for NP to make new bushes from plastic to fit a freshly turned pin.
Comments:
Post a Comment
