Thursday, April 01, 2004
Mudguard support
The front mudguard is held onto the triple clamp by three bolts and a broken one. The bolts came out readily and with a little luck I managed to drill down the broken bolt at 3.5mm without detouring into the alloy. I then progressively enlarged in 0.5mm steps to oversize and fitted a 6mm helicoil.
Most of the PO's red paint flaked off the plastic with a little effort with a stainless pan scrib. Look better.
The front mudguard is held onto the triple clamp by three bolts and a broken one. The bolts came out readily and with a little luck I managed to drill down the broken bolt at 3.5mm without detouring into the alloy. I then progressively enlarged in 0.5mm steps to oversize and fitted a 6mm helicoil.
Most of the PO's red paint flaked off the plastic with a little effort with a stainless pan scrib. Look better.
Comments:
Post a Comment
