Sunday, February 29, 2004
Gear linkage removal
With the engine bolts loose and the exhaust nuts off only the gear change (shift) stopped the engine from being moved (ignoring the electrics and airbox etc).
The linkage of both bikes was pretty tight on the splined shaft. To avoid damaging the shaft or the oil seals I made a minature puller to get it off. Worked a treat.
With the engine bolts loose and the exhaust nuts off only the gear change (shift) stopped the engine from being moved (ignoring the electrics and airbox etc).
The linkage of both bikes was pretty tight on the splined shaft. To avoid damaging the shaft or the oil seals I made a minature puller to get it off. Worked a treat.
Comments:
Post a Comment
